CHARMINGTONLAPOINTES.INFO

Unlocked 2 iphone to 2 updating an Kianna

Update February 20th

With iOS6.1.2 now available the window to upgrade jailbroken devices to iOS 6.1 is now closed, iOS 6.1.2 is currently not jailbreakable with redsn0w (but it is with evasion!)- this post will be updated when the next version of redsn0w is released to jailbreak iOS 6.1.2

In the meantime this information below will only work if you have your SHSH blobs saved locally or on Cydia.

If you don’t rely on an iPhone unlock with ultrasn0w then you can update and  jailbreak ios 6.0 – 6.1.2  with evasion – guide here

The latest version of redsn0w allows iPhone 3GS and iPhone4 to be jailbroken to iOS6.

The jailbreak is a mixture of tethered and unthered boots at this stage:

  • iPhone 3GS Old Boot Rom – untethered
  • iPhone 3GS New Boot Rom – tethered
  • iPhone 4 – tethered
  • iPod Touch 4th Gen – tethered
  • iPhone 4S
  • iPhone 5
  • iPod Touch 5th Gen
  • iPad 2 & 3
  • iPad 1 – max iOS 5.1.1 

If you don’t care about the baseband and are already working with an unlocked IMEI, follow this quicker jailbreak guide.

If you are looking to downgrade to an earlier iOS version such as from iOS 6 to iOS 5.x or  downgrade between iOS 5.1.1 or 5.1 or 5.0.1 and your SHSH blobs are on Cydia you can use the same restore procedure in the guide to restore to that iOS the only difference is that you need to specify the correct iOS IPSW that you want to downgrade to.

You can download those IPSWs from here. And if you need that baseband preserved just remember to click on the preserve baseband when prompted.

How to upgrade a previously jailbroken iPhone to iOS 6 and preserve the baseband.

The process of getting this job done requires a number of steps (but are easily done), which are downloading the official iOS 6 firmware from Apple, upgrading iTunes to the latest version, getting the latest redsn0w software from the dev team. If you are new to this it can well be intimidating with loads of jargon but take your time and go through the information below. This process has been tested and successfully installed/Jailbroken on a iPhone 3GS old boot rom device that has been previously jailbroken.

Please note at this point ‘ultrasn0w‘ is not ready for iOS6 eventhough Cydia is, . But if you still want your baseband preserved but don’t rely on ultrasn0w then you are good to go. You also can bypass ultrasn0w and just pay out the original carrier to unlock the phone by using an online service  like cutyoursim.com

Previously users had to create their own custom IPSW files, but the latest redsnow avoids this. This will not work on iPhone 4s and iPad2/iPad2 known as A5 devices.

io6-jailbreak

What boot-rom am I (for iPhone 3GS) ?

What basebands are unlockable ?

Getting Started…

Download Standard stock iO6 Firmware for iPhone

Download the latest official Apple stock IPSW iOS 6 for your iOS device:

Upgrade iTunes

Update to the latest version of iTunes Mac – iTunes Menu > Check for Updates Win –  iTunes Help Menu > Check for Updates

Sync iPhone to iTunes

This will ensure you have an up-to-date backup of your iPhone in iTunes

Get the latest redsn0w

Get the latest Redsn0w   — Mac OSX   or  Windows

OSX avoiding the Gatekeeper

If you are on OSX Mountain Lion you will need to control click or right click redsnow and open and choose open as this will avoid the security Gatekeeper, if on Windows open/redsnow as administrator

avoid-thegatekeeper

 Upgrade to iOS 6.0 with redsnow

1) Unzip and launch redsn0w – click Extras

ios6 jailbreak extras redsn0w

2) Select ‘Even More’

ios6-jailbreak-extras-even-more

3) Select ‘Restore’

ios6 jailbreak extrasredsn0w restore

4) Select ‘IPSW’

ios6-jailbreak-extras-even-more-restore-ipsw

5) Select the IPSW you downloaded at the beginning

ios6-jailbreak-extras-even-more-restore-ipsw-chose-firmware

6) Select ‘Yes‘ to preserve your baseband

redsnow preserve baseband

7) Get your device connected and in DFU Mode

Get the iphone into DFU Mode

8 ) with the device connected and turned off – when you click next  you go through the DFU mode process

ios6-jailbreak-dfu-mode

DFU Mode Steps

– the dfu mode process requires fingers on certain buttons  for certain amount of time – don’t worry if you stuff it up, you’ll be told you did and you can try again.

dfu mode failed

– Stop go back and try again if you fail miserably

9)  – Otherwise redsn0w will prepare a restore image and restore to your device maintaining your baseband and verify the restore

ios6-jailbreak-restore-image

ios6-jailbreak-restore-image-verify

10) Success and an iPhone restart

ios6-jailbreak-restore-image-verify-success

Now your iPhone has iOS6 with a preserved baseband – now to Activate and restore from iTunes, go through the screens on the iPhone reboot and activate the device from the questions asked.

Restore from iTunes

11 ) Launch iTunes – click your device and restore from backup

ios6-jailbreak-restore-itunes

After the restore, the iPhone reboots and asks for Location Services and iCloud services account details, in the background let iTunes sync the device and copy apps, music, books, movies – this can take a long time….

To Jailbreak

1) To jailbreak and install Cydia: –  launch redsn0w again

ios6-jailbreak-install-cydia

2) Click on install Cydia

ios6-jailbreak-install-cydia-check

3) You then have to enter the PwnedDFU mode again, so follow the onscreen instructions –

ios6-jailbreak-dfu-mode

When you fail to get into DFU you are told about it and you are left with a black screen – press and hold power and home buttons for up to 30 secs until you see the Apple logo.

jailbreak-complete

  Then on your iPhone/iPad you will see a hardrive icon followed by a bunch of scrolling code and then running pineapples – and its all happy days.

4) After rebooting, launch Cydia on the iPhone, the app will ask you what type of user you are – just go with ‘user‘ unless you want more and tap ‘done’.

cydia-user

That is the process finished, iOS is updated using custom IPSW files, device is jailbroken and unlocked, information below is additional and will help some users.

Additional iPhone Jailbreaking Info

Note on Tethered Boot !

If your iPhone requires a tethered boot this means that the device requires a software jumpstart (everytime it is booted) to operate after being jailbroken, there are a few apps that can do this but redsn0w also has the function built in. So if you have successfully jailbroke but are stuck on iPhone Apple logo, spinning gear on iPhone boot up, connect the iPhone, launch redsn0w > Extras. Then ‘just boot tethered right now’. This also applies if Cydia crashes on launch or you get a white icon – this means that a tethered boot is also required but is known as a semi-tethered boot as the iPhone can reboot without assistance but to be in a jailbroken state needs a tethered boot. The only iPhone that can boot untethered on this redsn0w/jailbreak is the old bootrom iPhone 3GS.

iphone-tethered-boot-apple-logo

What boot-rom am I?

Check your iPhone 3GS serial number, on iPhone – Look for the Serial Number – if the 4th & 5th digits are below 40 you are lucky and have the old boot-rom. To be absolutely sure about the boot rom – check if you have iboot 359.3

What basebands are unlockable with Ultrasn0w?

iPhone 4

iPhone 3G/3GS

  • 04.26.08
  • 05.11.07
  • 05.12.01
  • 05.13.04
  • 06.15.00

The official basebands installed for iOS6 these are not unlockable

  • iPhone 5 1.00.16
  • iPhone 4S 3.0.04
  • iPhone 4 04.12.02
  • iPhone 4 (CDMA) 3.0.04
  • iPhone 3GS 05.16.07
  • iPad3 2.0.02
  • iPad 2 (GSM) 04.12.02
  • iPad 2 (CDMA) 3.0.04

These are not currently unlockable with Ultrasn0w. If you mistakenly upgraded an unlocked/jailbroken iPhone via iTunes to a regular iOS update you will end up on one of these basebands and lose that unlockable functionality.

Epic Fails

Obviously things in life do not always go to the plan, there are some variables that will hinder the process….

Cats: ios, TechTags: baseband, boot, custom, ios, iphone, ipsw, jailbreak, jailbroken, redsn0w, rom, tethered, ultrasn0w, untethered

https://coolestguidesontheplanet.com/upgrade-jailbroken-iphone-to-ios-5-and-preserve-baseband-with-redsn0w/